DS90UB914A-Q1: Device marking of DS90UN914

user5013697

Intellectual 490 points

Part Number: DS90UB914A-Q1

Hello

Please let me know about waht device marking mean.

Please see attached file and please answer it.

Device marking DS90UB914ATRHSJQ1.pptx

Best regards

Yamane

over 6 years ago

0 Palaniappan Manickam over 6 years ago

TI__Genius 10475 points

Hello,
I am not sure what PG3 indicates, I will need to check about this internally.
Can you tell me why you are interested in this specifically or what you mean by fixed or variable?

0 Palaniappan Manickam over 6 years ago in reply to Palaniappan Manickam

TI__Genius 10475 points

Hello,
I confirmed that this marking is 'fixed' and will not change.
'P' is the primary assembly site code and 'G3' is the ECAT (environmental category).

0 user5013697 over 6 years ago in reply to Palaniappan Manickam

Intellectual 490 points

Hello

Thank you for the answer !

I'm cleared.

Would you please confirm one more.

which assembly site does "P" mean?

My DS90UB914 is marked "UG3". I think "U" means the assy site TI-Melaka, Does it correct?

Best regards

Yamane

DS90UB914

0 Palaniappan Manickam over 6 years ago in reply to user5013697

TI__Genius 10475 points

Your part marking on the slide shows 'P' and not 'U'.

0 user5013697 over 6 years ago in reply to Palaniappan Manickam

Intellectual 490 points

捺印仕様.pptxplease see attached page 2

Best regards

yamane

0 Palaniappan Manickam over 5 years ago in reply to user5013697

TI__Genius 10475 points

Hi,
You're right 'P' is not the actual site code, its just a key in the part marking for the assembly site.
'U' should be Melaka.

Interface

Interface forum

DS90UB914A-Q1: Device marking of DS90UN914