• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 1547 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCA9517: Enable pull up

Shu-Cheng LIN
Guru 11785 points
Part Number: TCA9517

Hi Sirs,

As title, we would like check should we need connect EN to VCCB??

Our schematic as below

By the way, A side have pull up resistor in other page

 Thanks!!

  • 0
    TI__Guru 62910 points
    Hello Shu-Cheng,

    Yes, it is generally a good idea to pull the enable line high if you want the device to remain constantly enabled. The EN pin does have an internal pull-up to VCCB as well, and so if the pin is left floating the default state will be for the chip to be enabled. Having an external pull-up is useful, though, since in most cases internal pull-up resistances are fairly weak.

    Regards,
    Max