In section 6.3 the recommended high level input on all pins except SCL and SDA is a maximum of 5.5 V. Is this the same for the pull up on the /INT pin? Or is it limited to a maximum of VCC?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In section 6.3 the recommended high level input on all pins except SCL and SDA is a maximum of 5.5 V. Is this the same for the pull up on the /INT pin? Or is it limited to a maximum of VCC?