ISO1432: Combination of SN65HVD33 and SN65HVD1792

MESH

Intellectual 860 points

Part Number: ISO1432
Other Parts Discussed in Thread: SN65HVD33, SN65HVD1792, THVD1452

Hello

Now I am designing RS-485 interface circuit using ISO1432.

The following transceiver ICs will be used for the components to be communicated with.

- Transceiver 1 : SN65HVD33

- Transceiver 2 : SN65HVD1792

I am wondering if there will be any communication problems due to small differences in characteristics between transceiver ICs.

I don't think there will be any problems, but just in case, let me check your company's knowledge.

Regards,

MESH

over 3 years ago

+1 Dushmantha Rajapaksha over 3 years ago

TI__Intellectual 1960 points

Hi MESH-san:

Thanks for your interest in TI RS-485 transceivers.

SN65HVD33, SN65HVD1792 and ISO1432 are all RS-485 compatible / compliant transceivers and will communicate with each other. For newer designs, I'd recommend looking into THVD1452 for a pin-to-pin upgrade of SN65HVD33.

Regards,

Dushmantha

0 MESH over 3 years ago in reply to Dushmantha Rajapaksha

Intellectual 860 points

Hi Dushmantha,

Thank you for your reoly.

Your reply is very helpful for me.

Regards,

MESH

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Isolation

Isolation forum

ISO1432: Combination of SN65HVD33 and SN65HVD1792