ISO3080: Maximum repetitive RMS isolation voltage/ surge voltage

Zach Xia

Part Number: ISO3080
Other Parts Discussed in Thread: ISO1412,

Hello team,

my customer would like to know the RMS value of max repetitive isolation voltage. And they also need surge voltage result under 1.2/50us voltage surge test. Thanks!

over 2 years ago

+1 Manuel Chavez over 2 years ago

TI__Genius 17100 points

Hi Zach,

Thank you for posting to E2E! The RMS value for repetitive isolation voltage of ISO3080 is ~395V, and it does not have a specified surge isolation voltage rating. Since ISO3080 is an older device, please strongly recommend ISO1412 to our customer: it is a newer isolated RS-485 device that is pin-to-pin compatible with ISO3080, is certified to more relevant isolation standards, and is available in Basic and Reinforced isolation options. Below are some of its isolation ratings:

Please let us know if there are any additional questions.

Thank you,
Manuel Chavez

0 Zach Xia over 2 years ago in reply to Manuel Chavez

TI__Expert 5065 points

Hi Manuel,

Thanks for your convincing reply! I would recommend the new device to our customer.

One more question, is there any other other difference between ISO1412 and ISO3080 ( if there is a comparison table )? Then I could better illustrate the upgrade to the customer. ~~~

Regards,

Zach

+1 Koteshwar Rao over 2 years ago in reply to Zach Xia

TI__Mastermind 49495 points

Hi Zach,

Thanks for considering to recommend the newer devices to customer.
As requested, I am copying below a comparison table comparing ISO14xx family devices with ISO3080. I am also listing out the key advantages of ISO14xx over ISO308x devices in the following image, thanks.

Regards,
Koteshwar Rao

0 Zach Xia over 2 years ago in reply to Koteshwar Rao

TI__Expert 5065 points

Hi Koteshwar,

Thanks for your detailed comparison! This helps a lot.

Isolation

Isolation forum

ISO3080: Maximum repetitive RMS isolation voltage/ surge voltage