ISO1211: ISO1211

Deepak Sibi

Prodigy 30 points

Part Number: ISO1211

Hi Team,

Greetings!

We simulated using the TINA tool for our inputs AC and DC. Attached is the snapshots of the Simulation using ISO1211.

Can you please review and advise on the same.

over 2 years ago

0 Koteshwar Rao over 2 years ago

TI__Mastermind 49485 points

Hi Deepak,

Thanks for reaching out.

I cannot clearly see the waveform, could you please share a higher resolution image of waveform where I could distinguish between waveform?
It would also help if the channels are not overlapped in the waveform. Thanks.

Regards,
Koteshwar Rao

0 Koteshwar Rao over 2 years ago in reply to Koteshwar Rao

TI__Mastermind 49485 points

Hi Deepak,

Will you be able to share a higher resolution image so that I can review the waveform and confirm if everything is working fine? Thanks.

Regards,
Koteshwar Rao

0 Deepak Sibi over 2 years ago in reply to Koteshwar Rao

Prodigy 30 points

Dear Koteshwar,

I shall share it by ASAP.

With Regards,

Deepak Sibi

0 Koteshwar Rao over 2 years ago in reply to Deepak Sibi

TI__Mastermind 49485 points

Hi Deepak,

Since I didn't hear from you, I hoping that you were able to resolve issues related to this post. I will go ahead and mark this thread as closed.
If you do have further questions, please feel free to respond to this post or create a new one. Thanks.

Regards,
Koteshwar Rao

Isolation

Isolation forum

ISO1211: ISO1211