Other Parts Discussed in Thread: ISO6763
Hi Team,
I want to isolate the SPI signal from a Printed Circuit Broad while entering another Printed Circuit Broad.
So I choose the isolator ISO6760.
The SPI from the main board is a 1.8V signal and the slave is a 3.3V device.
SO I connected VCC1 to 1.8V and VCC2 to 3.3V.
1). I hope there is nothing wrong with supplying 2 different voltage rails at VCC1 and VCC2.
2). What is meant by the supply current DC signal and Supply current AC signal in the datasheet?.
3). What is the current drawn from the VCC1 rail, VCC2, and the input signal rails.
The exact part number is ISO6763FDWR.