Hi team,
Could you pls share some data about the package thickness typ value? It's only have a maximum value showing in our datasheet : 2.65 MAX
Thanks
Best regards
Mia Ma
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Could you pls share some data about the package thickness typ value? It's only have a maximum value showing in our datasheet : 2.65 MAX
Thanks
Best regards
Mia Ma
Hello Mia,
Thank you for your question. We do not have this information on hand. We will reach out to our internal packaging experts for validation and get back to you.
Best,
Andrew
Hi Andrew,
Thanks for your quick response. Look for your feedback.
Thanks.
Best regards
Mia Ma
Hi Mia,
To clarify, are you looking for molded package body thickness, or distance from bottom of lead to top of package?
-Andrew
Hi Andrew,
Actually, I am confused about the difference between the two items you are mentioned; should these two be the same thing?
From my side, My customer want to confirm the thickness to verify for the vertical component placement.
Thanks.
Best regards
Mia Ma
Hi Mia,
There is a slight difference between the two according to the packaging experts.
The molded package body thickness would just be the thickness of the insulation (leads not included), whereas distance from the bottom of the leads to the top of the package would be total device thickness.
Based on your last comment I would assume you are looking for the total thickness of the device (bottom of leads to top of package), and have requested this information from the packaging team.
-Andrew
Mia,
Thank you for your patience. The nominal thickness of the device package (L1) is 2.29mm and the nominal total thickness of the device (L2) is 2.49mm.
I hope this answers your questions.
Best,
Andrew