Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 14 subscribers
  • Views 384 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO6761: Creepage Distance

James Swift1
Prodigy 30 points
Part Number: ISO6761

The datasheet reports the creepage and clearance values (CLR and CPG, pg.8) are >8mm but the suggested footprint shows copper that is <8mm apart between the isolated pins. What is the recommended footprint layout to maintain >8mm creepage and clearance? 

  • 0
    TI__Mastermind 22115 points

    Hello James,

    Thank you for reaching out. We are currently in the process of revising the package drawings in the datasheet from DW0016A to DW0016B. The mechanical drawings in the ISO776x datasheet contain the new revision, DW0016B, and can be used for the >8mm recommended footprint.

    I hope this helps. 

    Best,

    Andrew