hi Sir
May I know why only Sink has disconnection detection, but Source doesn’t have?
Is it becoz of the direction of current inside the chip? thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi Sir
May I know why only Sink has disconnection detection, but Source doesn’t have?
Is it becoz of the direction of current inside the chip? thanks
Hello Alex,
I believe you are correct that it is dependent on the direction of the current, but I am also having another expert take a look at this to confirm.
Best,
Michael
Hi Alex,
As Michael mentioned, in Sink mode: wire break detection work on the Wire break current in the range of μA.
In Source mode: the direction of current is opposite and wire break detection is not implemented.
Thanks
Vikas J
Eight Configurable IEC 61131-2 Type 1, 2, 3 Isolated Digital Inputs, may I know the key feature detail? or how to setup it,thanks
Hello Alex,
Please allow another day for response during the end of the year.
Best,
Michael
Hello Alex,
We will follow up with you on this topic through email.
Best,
Michael