• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 137 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO6521: Simulation

David Nestler
Prodigy 40 points
Part Number: ISO6521

I am using this isolator (PN: ISO6521REUR) in a design and I would like to simulate it in TINA.  The only simulation model available from TI on the landing page for this component is an IBIS model.  However, I can't figure out how to import this into TINA.  Can this be done and if not then is there another simulation model available for this component that can be used in TINA?  I want to perform transient simulations.

Thank you!

  • 0
    TI__Expert 8965 points

    Hi David,

    Thank you for your question.

    TINA is primarily used for SPICE simulator whereas IBIS  is a model that uses a simple table-based buffer model for semiconductor device. 

    Considering this, it may be possible that IBIS models may not work with TINA. However, IBIS model is supported by variety of commercial simulators. Some of widely used simulators are Mentor graphics, Keysight, Cadence and Synopsys.

    Regards,
    Aaditya Vittal