ISO6760: Unused input/outputs

Leon Hermans

Part Number: ISO6760

Tool/software:

Hello - I forgot to post this on my previous topic.

If I have unused inputs/outputs on the ISO6760, is there a preferred connection method? i.e. ground input, float output?

thanks

Leon

11 months ago

+1 Andrew J 10 months ago

TI__Mastermind 26895 points

Hello Leon,

Unused inputs can be either left floating or tied to the default output state. This can be either VCC or GND depending on if you are using an 'F' or non-'F' device.

Best,
Andrew

0 Leon Hermans 10 months ago in reply to Andrew J

Prodigy 130 points

Thank you Andrew. And outputs floating as well, correct?

+1 Andrew J 10 months ago in reply to Leon Hermans

TI__Mastermind 26895 points

Hello Leon,

Yes. Outputs should be floating as well.

Isolation

Isolation forum

ISO6760: Unused input/outputs