• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 15 subscribers
  • Views 89 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO6762-Q1: ISO6762F Power supply

Saraswathy G
Prodigy 100 points
Part Number: ISO6762-Q1

Tool/software:

Hi,

Please clarify what is the difference between these two cases of power supply mentioned here:

Which current is applicable for which condition. Pls clarify what is the significance of these two test conditions.

Thanks in advance.

  • 0
    TI__Genius 11225 points

    Hello,

    Thank you for reaching out!

    Please see the image below for a detailed labeling of this section:

    Saraswathy G said:
    Pls clarify what is the significance of these two test conditions.

    These test conditions are specified for when the isolator has DC signal (one state) applied to it. This means that when the device is in a constant state, the current consumption is as specified.

    Regards,
    Aaditya Vittal