The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO7710: ISO7710

Part Number: ISO7710

Is this a  graphical error in Fig 18 of ISO7710 datasheet?

If so , make a note of it. 

See attached 

 "WEAS" TO "IS"  being suggested.

If this has been pointed out earlier or fixed, ignore this post.