Hi expert,
If I configure the ISOW7842 VCC=3.3V, VISO=5V, will it work? And how about the efficiency at this time?
How about the load current of VISO at this time? How about its load capability to drive load?
Thank you.
Best Regards
Jack Chen
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi expert,
If I configure the ISOW7842 VCC=3.3V, VISO=5V, will it work? And how about the efficiency at this time?
How about the load current of VISO at this time? How about its load capability to drive load?
Thank you.
Best Regards
Jack Chen
Hi Jack,
Thanks for posting your question on the digital isolators forum.
Vcc=3.3V and VISO=5V is not supported by the ISOW78xx device currently.
The following modes are currently supported:
Since this configuration is not supported I do not have any data to share with you for efficiency, load current, or ability to drive load.
Best regards,
Dan