This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
My customer has a few questions:
Thanks for using the Digital Isolators Forum!
1. Yes that is correct, TI uses capacitive digital isolator technology. I'll paste a section of a recent analog applications journal article that sums up this technology's advantages:
Recent advances in capacitive digital isolators place them at the forefront of technology. These new isolators offer higher isolation performance, long-term reliability, increased channel integration, higher data rates and precision timing performance, better quality package mold compound, wider packages (14.5-mm creepage/clearance), and CMTI exceeding 100 kV/µs. Combining these features enables new applications, reduces system cost, and allows end-equipment manufacturers to push the performance envelope of their solutions.
Texas Instruments offers the ISO78xx family of reinforced digital isolators and the ISO585x and ISO545x families of reinforced isolated IGBT gate drivers. These isolators offer features and capabilities that can solve difficult isolation problems. These isolators have a working voltage of up to 1500 VRMS, are rated for 40 years, have surge voltage capability of 12.8 kV, and withstand a temporary overvoltage of 5700 VRMS. They offer high data rates of up to 100 Mbps with low skews and part-to-part variations and CMTI exceeding 100 kV/us. They also use material group I mold compound and are available in industry-leading wide packages.
2. Correct, in the on-off keying (OOK) based architecture there is a high frequency oscillator. (Here’s a link to the Digital Isolator Design Guide which describes OOK, edge based architectures, and some other useful terms more in depth). If you look in the conceptual block diagram, you’ll also note that this is spread spectrum to keep emissions low.
We have done internal testing on our parts and have found that the radiated emissions are very low, especially compared to some of our competition, but depending on your application this could potentially still be an issue. We’ve found that many of these issues can be fixed after the team gives a schematic and layout review, which we would be more than happy to do for you. But in general our isolators are very quiet. For example, ISO7741 passes CISPR22 with a good deal of margin. Perhaps you could share a block diagram and some more information about your specific application and we can give you a better idea of whether or not these high frequencies should be of concern.
Please let me know if I’ve answered your question or if you have any additional questions.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Is there frequency range you can provide for the spread-spectrum block so we can understand the general frequencies that are used?
In reply to David Cuevas:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.