This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54240-Q1 How to Interface to RT/CLK Pin

Other Parts Discussed in Thread: TPS54240-Q1


My customer has question about TPS54240-Q1.
Could you tell me about questoin?

 You recommend AC-coupling the synchtonization signal through a 10-pF ceramic capacitor to RT/CLK pin and a 4-kohm series resistor in datasheet.
 Why is it 10-pF and 4-kohm? My customer want to use 4.7-kohm. How much is maximum value of resistor?

Best Regards,