The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

900 mhz Laundry Tags...

Other Parts Discussed in Thread: RF-HDT-DVBE, RF-HDT-DVBB

I was looking to build a system using 900 Mhx laundry tags. Kind of a learning experience.   I'd also want to use a TI MSP 430 or 432.  And I want to get an antenna, and read a bag of tags.  So, can I do this with TI parts, and which parts should I be looking at?

any other comments, sources, links, I would also appreciate.

thanks

  • sorry we do not make UHF RFID tags (for about 7 or 8 years now) - we do make HF RFID laundry tags (see RF-HDT-DVBB or RF-HDT-DVBE)

    usually an application like this (laundry) is needing high power readers and larger antennas (either freq band)

    check out Feig Electronics for those (they sell hardware for both bands)