• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 14 subscribers
  • Views 995 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLK2711-SP Power up with "ENABLE Low"

masahiko shimizu
Guru 11235 points
Other Parts Discussed in Thread: TLK2711-SP

Hi,

I have questions at Figure 5g(5962-05221 RevG).
Could you answer me this questions, please?

From figure 5g, I understood that TLK2711-SP is operated with normal mode (not power down mode) after 1ms from ENABLE is high.
Is this correct?

Best regards,
Shimizu

  • 0
    TI__Guru 62930 points
    Shimizu,
    Option 2 power on reset diagram was supposed to be removed from the datasheet. It was determined that it was not 100% effective in resetting the RX. The description provided in the other post and in the TI datasheet is correct.
    I will follow up with QA to have the SMD updated to remove option 2.
    Regards,
    Wade