This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RGMII connect RGMII can't work,output wrong clock

Prodigy 40 points

Replies: 0

Views: 1331

Our platform is TI J6,we use rgmii0 direct connect the RGMII on switch bcm89501.

I modify the cpsw driver to fixed phy mode,and the register "SL_MACCONTROL"  be set to value 0xA1 ---/full duplex,1000M speed.

But the TX clock on J6'RGMII still output 2.5M.

If anyone can help me ??

Thanks !!