This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OMAP 5432 : Code Execution on Cortex M4

Intellectual 330 points

Replies: 3

Views: 3726

Hi,


On OMAP5432 platform, Cortex A15 and Cortex M4 processors are present.

Since board has two processors, if I want to evaluate Cortex M4 code on the board, do I need to do any special modification to the Operating System/boot loader?

Thanks and Regards

 Sridhar Artham

3 Replies

  • Hi,
    You can use the following forum for your OMAP5 related queries, now I am moving this post there.
    e2e.ti.com/.../885

    Typically cortex-M4 will be used for power management while main core is shutdown and also it can be real time apps.

    By default these cores will be enabled and it can be access through firmware driver.

     

    Regards,

    Titus S.

    Please use the latest processor SDK package for your platform (K2H,K2E,C665x,C667x etc.,)

    http://www.ti.com/lsds/ti/tools-software/processor_sw.page

  • In reply to Titusrathinaraj Stalin:

    Hi,

    Moving your pos to right forum to be better answered.

    Thanks & regards,
    Sivaraj K
     
  • Hello Sridhar,

    Please take a detail look on this wiki - processors.wiki.ti.com/.../BIOS_with_GCC_(CortexM)

    Best regards,

    Yanko

      Please click the Verify Answer button on this post if it answers your question.

            Be sure to read the OMAP Application Processors Forum Guidelines and FAQ

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.