This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Stuck during booting Pandaboard ES Rev b3

Prodigy 10 points

Replies: 1

Views: 2848

Hi All,

 First of all, I am sorry to post this question at wrong Forum. I would like to post it at OMAP 4460 Forum but I could not get permission to post.

Second of all, I have tried to bring up a Pandaboard ES Rev b3 by using "http://omappedia.org/wiki/4AJ.2.2_OMAP4_Jelly_Bean_Panda_Notes". I could succeed compile X-loader and U-boot and I copyed these to SD card (I made a SD card by using "http://omappedia.org/wiki/Android_Build_SD_Configuration"). I tried to boot the board with the SD card but it is stuck at below part.

Texas Instruments Inc X-Loader 1.41.0-gcd95b47e (Sep 15 2015 - 01:32:09)
OMAP4460: 1.2 GHz capable SOM
mmc read: Invalid size
Starting OS Bootloader from MMC/SD1 ...

Would you please give me advice regarding it?

Thank you,

Logan,

 

1 Reply

  • Hi Logan,
    I have moved your post to OMAP5 forum which is read only.
    Have you tried pre-built (default) boot images on SD card boot ?
    You are facing problem only with compiled binary ?

     

    Regards,

    Titus S.

    Please use the latest processor SDK package for your platform (K2H,K2E,C665x,C667x etc.,)

    http://www.ti.com/lsds/ti/tools-software/processor_sw.page

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.