OMAP5910 UART

Prodigy 170 points

GONTA

Replies: 2

Views: 3683

Hello.
I'm working for a distributor.
I have a question.

I'd like to test using a probe in UART pin of OMAP5910.
Then even how many volts is a pin endured?
(OMAP5910 is power supply off.)

Best Regard,

Prodigy 170 points

GONTA

• Dec 2, 2016 6:46 AM
• Locked
• Cancel

2 Replies

• Guru 65405 points

  

  Cvetolin Shulev-XID

  

  • Dec 2, 2016 2:23 PM

  I've forwarded this to the schematics experts. Their feedback should be posted here.
  
  BR
  Tsvetolin Shulev

  • Locked
  • Cancel

  Do you have another question?

  We are glad that we were able to resolve this issue, and will now proceed to close this thread.

  If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.

  Ask a related question Ask a new question
• Mastermind 42040 points

  

  SenthilKumar Srinivasan

  

  • Dec 2, 2016 3:12 PM

  Moving this thread to right forum.
  
  Regards,
  Senthil

  ----------------------------------------------------------------------------------------------------------------

  Please click the "Verify Answer" button on this post if it answers your question.

  • Locked
  • Cancel

  Do you have another question?

  We are glad that we were able to resolve this issue, and will now proceed to close this thread.

  If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.

  Ask a related question Ask a new question