This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RGMII connect RGMII can't work,output wrong clock

Our platform is TI J6,we use rgmii0 direct connect the RGMII on switch bcm89501.

I modify the cpsw driver to fixed phy mode,and the register "SL_MACCONTROL"  be set to value 0xA1 ---/full duplex,1000M speed.

But the TX clock on J6'RGMII still output 2.5M.

If anyone can help me ??

Thanks !!