Aptina camera interface to VAYU VISION application board

Rohit,

This thread has been moved to a more appropriate forum for support.

Regards,
Eric Hackett

Hi Rohit,
What is your processor ?
What is your OS ?
Starterware or Linux or TI-RTOS etc., ?

Hi Rohit,

Please mention the processor ( OMAPL1x ? or AM1X ? or C674X ? ) Is it a custom board or TI EVM?

What is the BSP user guide you are referring?. It belongs to which processor ?

If you are using the OMAPL1x, a composite Leopard Imaging camera is interfaced with the OMAPL138 LCDK board. you can refer to 

Regards,

Shankari

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question.
--------------------------------------------------------------------------------------------------------

HI Shankari / Titus S,

My board details are as follows:

Processor : DRA7xx series (VAYU Board TDA2xx series)
daughter board : VAYU VISION Application Board Rev C.
OS : SYS/BIOS version bios_6_41_01_36
Starterware_01_02_05_08

I specifically want to know the pin details of P3 connector(Aptina camera) of the daughter board. FYI the recommended camera for this board is Aptina MT9V022(P3) but we have Aptina MT9V024. Just wanted to cross check the pin compatibility of our camera with board.

Thanks & Regards,
Rohit

Hi Rohit,
I've looked into the both sensors MT9V024 and MT9V022 data sheet.
It seems to be both are pin to pin compatible.

Hi Titus S,

Thanks for your reply. Could you please share data sheet for both sensors MT9V024 and MT9V022 which your are referring to.

Regards,
Rohit

Hi Rohit,

Please refer to the both links, "Ball descriptions Chapter"

aptina.atlassian.net/.../MT9V024_DS.pdf
www.aptina.com/.../downloadDocument.do

Hi Titus,

Thanks you for your prompt reply and the information shared.

The pin details of the Aptina (MT9V024) camera board (Black PCB in the uploaded image) has some details given. I don't see any pin details of the VAYU vision board Aptina connector, (Aptina P3). Just to make sure that I don't burn the boards due to pin mismatch (especially VCC abnd GND).  It would be great if we get some information of the pin to pin details of the P3 connector.

Attached is the image of Aptina camera MT9V024 for your reference. Please suggest.

Regards,

Rohit

4857.Aptina_camera_pin_details.pptx

Hi Rohit,
I'm not sure about P3 connector of VAYU vision board.
Do you have schematics of this board ?
Just I checked the both data sheets of camera.

I specifically want to know the pin details of P3 connector(Aptina camera) of the daughter board. FYI the recommended camera for this board is Aptina MT9V022(P3) but we have Aptina MT9V024. Just wanted to cross check the pin compatibility of our camera with board.

You said that MT9V022 camera would support VAYU vision board ?
Where did you see this info about "MT9V022" that would support for this board ?
If thats the case then it surely work well, no issues.