This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Stuck during booting Pandaboard ES Rev b3

Hi All,

 First of all, I am sorry to post this question at wrong Forum. I would like to post it at OMAP 4460 Forum but I could not get permission to post.

Second of all, I have tried to bring up a Pandaboard ES Rev b3 by using "http://omappedia.org/wiki/4AJ.2.2_OMAP4_Jelly_Bean_Panda_Notes". I could succeed compile X-loader and U-boot and I copyed these to SD card (I made a SD card by using "http://omappedia.org/wiki/Android_Build_SD_Configuration"). I tried to boot the board with the SD card but it is stuck at below part.

Texas Instruments Inc X-Loader 1.41.0-gcd95b47e (Sep 15 2015 - 01:32:09)
OMAP4460: 1.2 GHz capable SOM
mmc read: Invalid size
Starting OS Bootloader from MMC/SD1 ...

Would you please give me advice regarding it?

Thank you,

Logan,