The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC16T245: SN74LVC16T245

Part Number: SN74LVC16T245

regarding unused pins termination-:

1) Unused output can keep open.No need to have pull-up or pull down.Is it right?

2)Unused inputs can we tied directly to GND or do we have to use some resistor lets say 20kohm to pull-down?Please confirm