This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G125: state when hot swap state

Part Number: SN74LVC1G125

Dear team

my customer want to use SN74LVC1G125 in hot swap function, although I think this device could support because power off protection feature, this will isolate input and output.

But When in this application, OE connect to GND, which means always on, 125 don't have power-up 3- state, can't ensure the high-impedance state during power up or power down. So what's the state power up, any risk in hot swap application?