Hi guys,
Has someone once encountered that when the VCC voltage was insufficient that the input signal voltage(3.3V) will cross to the output and VCC by clamping diode?
Thanks a lot!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi guys,
Has someone once encountered that when the VCC voltage was insufficient that the input signal voltage(3.3V) will cross to the output and VCC by clamping diode?
Thanks a lot!
Hi Sway,
You can read about this at this FAQ: [FAQ] Can the input voltage (Vi) to my logic device be higher than the supply voltage (Vcc)?