SN74LVCR162245: Logic forum

Nazmi Özbas

Part Number: SN74LVCR162245

I would like to use the transceiver to control USB and HDMI signals. However I could not find the maximum supported data rate in the datasheet.

Would appreciate if the information can be provided.

Regards,

Ata

over 3 years ago

+1 Clemens Ladisch over 3 years ago

Guru 308040 points

This device does not work with differential signals.

What exactly do you mean with "control"?

0 Nazmi Özbas over 3 years ago in reply to Clemens Ladisch

Prodigy 20 points

Thank you for your reply.

What I meant with control was, to use the Transceiver as a switch/gate to let the HDMI & USB signals through or cut the connection (isolate the signals) when desired. With the use of the OE pin.

But I guess I have to find another device.

Do you have any recommendations for such an application?

+1 Clemens Ladisch over 3 years ago in reply to Nazmi Özbas

Guru 308040 points

You can use any analog switch that supports the required voltage and bandwidth. There also are protocol-specific switches (HDMI is LVDS).