I'm using the above part in my design and would like TI to review the design. I prefer email or personal messages instead of sharing in the forum.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I'm using the above part in my design and would like TI to review the design. I prefer email or personal messages instead of sharing in the forum.
Hi Pragash,
Please refer to my responses in this post.
Hi Dylan,
I repost the same question because I'm not fond of the response. I have sent my schematic in PM and email for my other circuitry for SME to check. I expect the same for the level shifter. Suppose you cannot do that; please lets others reply. Thanks.
Hi Pragash,
Reposting the question will not benefit you unless you are able to share the schematic. Feel free to private message me, but I will go ahead and close this post since there is no further support to be done.