Hi expert,
I found the input creteria is shown as:
so how about the input voltage above 0.3VCC and below 0.7VCC?
Is it not sure?
so does it mean we need customer to restrict their input voltage?
BR
Emma
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi expert,
I found the input creteria is shown as:
so how about the input voltage above 0.3VCC and below 0.7VCC?
Is it not sure?
so does it mean we need customer to restrict their input voltage?
BR
Emma
Voltages between these thresholds are invalid and must happen only for a short time during switching.
See the Δt/Δv limit in the Recommended Operating Conditions, and [FAQ] How does a slow or floating input affect a CMOS device?