This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74HCS125: Using for SPI 5V to 3.3V

Part Number: SN74HCS125
Other Parts Discussed in Thread: SN74LVC125A, SN74AHCT1G125, SN74LV125A, SN74AHC125, SN74LV4T125, TXU0304


I have 5V microcontroller and I am trying to run two 3.3V slave could you please let me know if this will work for me SN74HCS125BQAR.

Below schematic

Since this is for SPI should I use LV series in instead( what is different between 125, 126 (pull high on))

Please let me know if you have any questions.