Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
LSF0108-Q1: The output voltage of A side is limited by VrefA
According to the description of the following video, the A side of LSF0108 should be able to output a voltage higher than VrefA, such as 3.3V in the video. But when we use LSF0108-Q1 , it was found that the output voltage of side A was limited to 1.2V, which could not be changed even if it was pulled up to 3.3V. What's the reason? Thank you.
