• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 175 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC2G17: Not able to select 3.3V option in Schmitt-Trigger IBIS model

ASHWINI CHANDRASHEKAR
Prodigy 30 points
Part Number: SN74LVC2G17

In IBIS model by default, it’s 1.8V.

This model also support for 3.3V.

Could you pls help to select 3.3V option in IBIS model.

Thank you in Advance. 

 

  • 0
    TI__Expert 4531 points

    Hi Ashwin,

    What software are you using to simulate the IBIS models. For this it's software dependent, and there is not much we can do as the IBIS model is made to support 3.3 V. You might have more luck making this request on the simulation software's side rather than here.

    Regards,

    Owen