TXS02612: low-level input voltage (VIL) max

Danilo A.

Part Number: TXS02612

Hi Team,

I understand in the E2E thread below that the internal one shot is tuned to trigger at 1/2 of Vcc. Our customer would like to know what is the low-level input voltage (VIL) max of the TXS02612 as it seems that the 0.15V max stated in the datasheet is too low.

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/761297/txs02612-vih-at-vccb-1-8v

Regards,

Danilo

over 1 year ago

0 Michael Ikwuyum over 1 year ago

TI__Mastermind 22085 points

Hi Danilo,

The VIL is as spec'd similar to the datasheet for 0.15V max.

Could you clarify your use case / application interface for this case as well as the target VIL to see if there is a more suitable recommendation? Thanks.

Best Regards,

Michael.

0 Clemens Ladisch over 1 year ago

Guru 243220 points

The V_IL specification is not a hard limit; a higher input voltage will just result in a higher V_OL. See [FAQ] Why are the TXS01xx VIH/VIL specifications so stringent?

Logic

Logic forum

TXS02612: low-level input voltage (VIL) max