Hi Experts,
I need your expertise for confirmation. Quick question about using TXB0106:
Say I use 3.3V for Vccb and 1.2V for Vcca, but I provide a 5V signal (essentially from USB) to enable the level shifter.
Is that a valid case?
I’m asking to be sure the max 5.5V shown in the datasheet means unrelated to Vccb or Vcca supplies.
My only concern is that OE is above both supplies. It's 5V while VCCA and VCCB are 1.2V & 3.3V.
Thank you in advance for your support.
Best regards,
Jonathan
