• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXB0104-Q1: TXB0104-Q1 RECOMMEND for level shift the directions signal only

Lawrence He
Expert 2980 points
Part Number: TXB0104-Q1
Other Parts Discussed in Thread: TXU0304-Q1, TXU0104-Q1, TXU0204-Q1, SN74AXC4T245-Q1, SN74AXC4T774-Q1

Hi, Support Team

as below diagram sky blue block, limited signal path as single direction. 

Could recommend for level shifter the directions signal-only(or controllable) for Automotive parts.

if any, Please advise me.

Thanks,

Best regards,

Lawrence

  • 0
    Guru 281530 points

    The TXU0104-Q1 is P2P, if the direction is A to B. (For other combinations of directions, see the TXU0204-Q1/TXU0304-Q1.)

    For selectable direction, see the SN74AXC4T774-Q1 (one direction per channel) or SN74AXC4T245-Q1 (directions in groups of two).

  • 0 in reply to Clemens Ladisch
    Expert 2980 points

    Hi, Clemens

    I have fuel questions need check as below.


    1. Is SN74AXC4T774-Q1 and SN74AXC4T245-Q1 design different between those?
    a. SN74AXC4T774-Q1 is design for more direction-control flexible?
    b. SN74AXC4T245-Q1 is design for more output enable flexible?
    c. Pre-channel frontend design is push-pull or Schmitt?


    2. TXU0104-Q1, TXU0204-Q1, TXU0304-Q1 those different is only in pin(s) direction?

    if any suggestion, Please advise me.

    Thanks,

    Best regards,

    Lawrence

  • 0 in reply to Lawrence He
    Guru 281530 points

    1a. Yes.
    1b. Yes.
    1c. The AXC devices have plain inputs; the TXU devices have Schmitt-trigger inputs.
    2. Yes.