SN74AHC244-Q1: TAPE DIMENTIONS

Yuta Nishie

Genius 4480 points

Part Number: SN74AHC244-Q1

Hi,

Looking at the datasheet, there are differences in TAPE DIMENSIONS with and without G4.
Is this correct?

I saw the post below and thought there was no difference between G4 and no G4.

So please also tell me why the TAPE DIMENSIONS is different.

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/720395/faq-why-does-a-logic-device-s-part-number-have-an-e4-g4-suffix

Best Regards,

Nishie

over 1 year ago

+1 Albert Xu1 over 1 year ago

TI__Mastermind 34035 points

Hi Nishie,

I'm not sure why the tape dimensions are different, these are set by the packaging team. But I can assure you the devices are the same.

0 Yuta Nishie over 1 year ago in reply to Albert Xu1

Genius 4480 points

Hi Albert-san,

Thank you for your reply.

Is it okay to understand that this difference is not an error in the datasheet, but that the Tape Dimension is actually different?

Best Regards,

Nishie

+1 Albert Xu1 over 1 year ago in reply to Yuta Nishie

TI__Mastermind 34035 points

HI Nishie-san,

Yes it is possible that the dimensions are different. To be fair, they are extremely minimal. It should not affect customer use at it is only the tape size. The device will be the same functionally.

Logic

Logic forum

SN74AHC244-Q1: TAPE DIMENTIONS