SN74AHC541-Q1: About datasheet

Luna

Intellectual 890 points

Part Number: SN74AHC541-Q1

Hi team,

Why is the datasheet marked 'TI Confidential' ?

I would like to suggest a replacement for '74VHC541FT (BJ)'.

Requirements: AEC-Q100 qualified, TSSOP package

Please tell me what products you recommend.

Best regards,

over 2 years ago

0 Clemens Ladisch over 2 years ago

Guru 319150 points

The previous revision of the datasheet (SCLS603A) has no such remark, so there are no actual secrets. You can use the SN74AHC541-Q1.

I guess there was an error made when publishing the new datasheet revision.

0 Luna over 2 years ago in reply to Clemens Ladisch

Intellectual 890 points

Hi Clemens Ladisch,

Thank you for your information that the previous revision of the datasheet has no such remark.

I would also like to wait for an official response from Texas Instruments.

Best regards,

0 Albert Xu1 over 2 years ago in reply to Luna

TI__Mastermind 42455 points

Hi Luna,

The version that is uploaded to the website seems to be a "Draft". All of our drafts are labeled with the watermark and "Confidential". This is an issue with whoever published this to the website. The datasheet has all correct information. I will look into getting this fixed.

0 Luna over 2 years ago in reply to Albert Xu1

Intellectual 890 points

Hi Albert Xu1,

Thank you for your reply. Can I understand that there is no problem in suggesting SN74AHC541-Q1 as an alternative to '74VHC541FT (BJ)' ?

Best regards,

0 Albert Xu1 over 2 years ago in reply to Luna

TI__Mastermind 42455 points

Hi Tina,

Yes, that is a fine alternative. You can also always check our Cross-reference tool here: https://www.ti.com/cross-reference-search

0 Luna over 2 years ago in reply to Albert Xu1

Intellectual 890 points

Hi Albert Xu1,

Thank you for checking the proposed product. I usually use cross-reference tool. This time, I was curious about notation on the datasheet, so I posted it on E2E.

Best regards,

Logic

Logic forum

SN74AHC541-Q1: About datasheet