This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXU0204: Output Enable Control

Part Number: TXU0204


I have a question about output enable control of TXU0204.

My design is like below.

- VCCA=3.3V(Fixed), VCCB= 1.8V or 3.3V(Default)

- Output Enable referenced to VCCA through 10kohm resistor

From the link below Karan mentioned that powering VccB off while INA is in a high state.

What if output enable pin is in low state and then VccB is powered off while INA is in a high state? Would it be either undesirable situation?