Other Parts Discussed in Thread: SN74HCS74-Q1
Tool/software:
Hi team,
Do you know if we have output Q level flip issue when 500V HBM ESD test in PRE/CLK/Q pin? my customer found this issue and want to know why.
BR
Amber
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi team,
Do you know if we have output Q level flip issue when 500V HBM ESD test in PRE/CLK/Q pin? my customer found this issue and want to know why.
BR
Amber
Hi Amber,
Can you expand a bit more on what the issue is? As of now there are no known issues with the device.
Yes Clemens,you are right, so do we have filter component design reference for customer?
In general, ESD is not the primary problem for signal inputs.
So why did the customer choose to do an ESD test directly on the PRE/CLK inputs?
Hi Amber,
This device is rated for 2kV HBM. Can you go a bit more indepth on what the issue you are seeing?