TXU0304: Level shifter(TXU0304PWR) Schematic Verification

Shwetha J

Part Number: TXU0304

Tool/software:

Dear Team,

We have added TXU0304PWR , this level shifter IC in one of our project for PCM,where as our input Signals IO voltage is 3.3V and Output Signals IO voltage is 1.8V,so requesting you to verify this Schematic section and give your feedback if any changes are required in this schematic.

Thanks & Regards
Shwetha

5 months ago

0 Shwetha J 5 months ago

Prodigy 30 points

Dear Team

Any update about this level shifter(TXU0304PWR) section circuit verification?

Thanks & Regards

Shwetha

0 Michael Ikwuyum 5 months ago in reply to Shwetha J

TI__Mastermind 40375 points

Hi Shwetha,

Schematic looks good overall.

I would further recommend avoiding the voltage divider network from using both pull up and pull down on OE pin as the pull-down can be removed, thanks.

Best Regards,

Michael.

0 Shwetha J 5 months ago in reply to Michael Ikwuyum

Prodigy 30 points

Dear Michael,Thanks for your reply,

are you saying to remove R149(121K) pull down resistors?please confirm.also hope remaining pin assignments are proper.