SN54SC8T541-SEP: PN54SC8T541MPWTSEP Ibis Model Request

Jeff Brayshaw

Part Number: SN54SC8T541-SEP

Tool/software:

This request is on behalf of my client, Spacemicro/Voyager Space. Wanted to see if there was an ibis model available for the part listed below. Simulating general signal integrity for a board that will be going into Space and these parts are used throughout the design for level translation both locally and to other cards cnnected through a VPX backplane. Goal is to perform SI simulation on a cross section of both local signals and signals crossing the back plane (mutii-board smulation) to verify SI. Please advise

PN54SC8T541MPWT-SEP

Thanks,

Jeff

6 months ago

0 Joshua Salinas 6 months ago

TI__Genius 17970 points

Hello Jeff,

We don't have an IBIS model for this part. I can put an IBIS model request with our team but unsure on the completion date. Apologies for the inconvenience this brings.

Regards,

Josh

0 Jeff Brayshaw 6 months ago

Prodigy 20 points

Thank you. Is there a part that does have an ibis model with comparable I/O characteristics?

0 Joshua Salinas 6 months ago in reply to Jeff Brayshaw

TI__Genius 17970 points

Hello Jeff,

Let me check with our team but at the moment none of our space enhanced products don't have IBIS model.

Regards,

Josh

0 Jeff Brayshaw 6 months ago in reply to Joshua Salinas

Prodigy 20 points

Understand. Is there a comparable non-space enhanced product that has an IBIS model? We are looking for gross problems so the differences shouldn't be signficant. Please advise. Thanks.

0 Joshua Salinas 6 months ago in reply to Jeff Brayshaw

TI__Genius 17970 points

Hello Jeff,

I would look at the SN74LV4T125 IBIS model. Again it won't a one-to-one model but it's the closet device with comparable I/O characteristics.

Regards,

Josh

Logic

Logic forum

SN54SC8T541-SEP: PN54SC8T541MPWTSEP Ibis Model Request