• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 439 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LV595A Dynamic Current Draw

David Caloccia
Prodigy 10 points

On the SN74LV595A Rev Q datasheet the 9.2.3 Application Curve of ICC VS Frequency dose not look correct specifically the 5 V, where 20 MHZ of clock indicates 400 MilliAmps. It lack information on setup but I assume the Clock and storage clock are the same frequency but still seems unreasonably high.

  • 0
    TI__Guru 55960 points
    Hi David ,

    You are right , that doesnt seem right to me either , at 1.4A it would burn out the part i imagine . Most likely the units would have to be uA which makes more sense to me , but i will investigate it further and let you know . Will also submit a request to update the datasheet with correct values .
    Thanks for pointing it out .