• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 479 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74HC139-Q1: VIH_min and VIL_max value under Vcc=3.3V

K.Yaita
Guru 29710 points
Part Number: SN74HC139-Q1

Hi Team,

My customer's application is Vcc=3.3V.
I would like to ask about the following.

1)
Is there VIH_min and VIL_max value under Vcc=3.3V?




2)
Is there tpd_max (A or B to Y, notG to Y) value under Vcc=3.3V?



Best Regards,
Yaita / Japan disty

  • 0
    TI__Guru* 96712 points
    Hello Yaita-san,
    Any interim value can be calculated from the datasheet using linear interpolation from the nearest two points. In this case, 2 V and 4.5 V values would be used to get the 3.3 V value.

    If you would like me to provide the calculation, please let me know.