SN74LVTH125: Thermal information not in datasheets

Brian Antheunisse

Part Number: SN74LVTH125
Other Parts Discussed in Thread: SN74CB3T3245, SN74LV4T125

Hi guys,

Can you help me find the below info for these logic devices? We can't find them in the datahseet.

			*Junction-to-Ambient Thermal Resistance*	*Junction-to-Case (top) Thermal Resistance*	*Junction-to-Board Thermal Resistance*	*Max Junction Temp*	*Min Junction Temp*
XES P/N	TI Part Number	Description	R_Ɵ_JA [°C/W]	R_Ɵ_JC [°C/W]	R_Ɵ_JB[°C/W]	T_J,max[°C]	T_J,min[°C]
40000086	SN74LVTH125RGYR	IC, Quadruple Bus Buffer, SN74LVTH125, QFN-14, IND
40000057	SN74LVTH125PWR	IC, Quadruple Bus Buffer, SN74LVTH125, TSSOP-14, IND	113
40003245	SN74CB3T3245DGVR	IC, 8-Bit FET Bus Switch, SN74CB3T3245, TVSOP-20	92			150

Thanks,

Brian

over 5 years ago

0 Karan Kotadia over 5 years ago

TI__Genius 16725 points

Hello Brian,

Here are the thermals for the SN74CB3T3245DGVR and the SN74LVTH125PWR. I am submitting a request to get the thermals for

SN74LVTH125RGYR and should have that for you in under two weeks.

SN74CB3T3245DGVR:

SN74LVTH125PWR:

Please note that the max junction temperature: Tj = Tstg which is listed in the datasheets. Here is an FAQ that talks about this:

Thanks!

-Karan

0 Brian Antheunisse over 5 years ago in reply to Karan Kotadia

TI__Expert 5215 points

Karan,

Thanks for the info. Under two weeks may be tough for my customer who has to start on the enclosure for their product ASAP. Wondering if you guys have a p2p identical part for the SN74LVTH125RGYR they could use instead that has more datasheet guidance? It may be faster for them to just switch than you guys hunting down/collecting the data.

Thanks!
Brian

0 Karan Kotadia over 5 years ago in reply to Brian Antheunisse

TI__Genius 16725 points

Hi Brian,

Typically the thermal requests get completed within a week however I still estimate that it may take up to two weeks.

For now I can give you thermals for SN74LV4T125RGY. The thermals for the SN74LVTH125RGY will not be much different from what these values are since they are both in the same package. So this way you get a rough estimate of what the values will be.

As for getting you a pin to pin compatible device, I need to know more about your application, voltages, frequency and any other crucial features you might need.

Thanks!

-Karan

0 Brian Antheunisse over 5 years ago in reply to Karan Kotadia

TI__Expert 5215 points

If there isn't a direct replacement without needing to give you more details then lets just forget about another part. This guidance does help, I think it will be enough to get them started, though we would like to see the results when they are available.

thanks!
Brian

0 Karan Kotadia over 5 years ago in reply to Brian Antheunisse

TI__Genius 16725 points

Hello Brian,

For a direct replacement, the closest is SN74LV4T125 in the RGY package which is pin to pin compatible with similar operating voltage range. However this device does not contain the bus hold feature. This is the device I gave you the thermals for.
As soon as the thermals for the SN74LVTH125 come in, I will post them here.

Thanks!
-Karan

0 Karan Kotadia over 5 years ago in reply to Karan Kotadia

TI__Genius 16725 points

Hi Brian,

I have the thermals for the SN74LVTH125RGYR.

Thanks!

-Karan

Logic

Logic forum

SN74LVTH125: Thermal information not in datasheets