SN74LVC1G374: Issue with HSPICE Symbol

Rajat Singh

Part Number: SN74LVC1G374
Other Parts Discussed in Thread: SN74LVC1G86, TINA-TI,

Hi ,

I have to simulate one UART Based circuit by using SN74LV1G374 and SN74LVC1G86.

I have designed this circuit in LTSPICE by using HSPICE Model available on TI Website.

While running the circuit i am facing attached error i.e related to symbol only.Can you please let me know where is the issue.

I have download the symbol from HSPICE Model from below link.

http://www.ti.com/product/SN74LVC1G374/toolssoftware

over 4 years ago

0 Karan Kotadia over 4 years ago

TI__Genius 16725 points

Hi Rajat,

HSPICE models are only meant to be used with the synopsys tool hspice. You need a PSPICE mdoel to be used in a tool like LTSpice.

I have the LVC1G86 PSPICE model on hand. It will take me up to 2 weeks to have the LVC1G374 model made.

SN74LVC1G86_Behavioral_Model_v181105.TSC

SN74LVC1G86.cir

The .tsc file can be opened and used in TINA-TI. A software like LTSPICE provided by TI for free. The .cir file can be used in any SPICE modeling tool you wish.

Thanks!

-Karan

0 Rajat Singh over 4 years ago in reply to Karan Kotadia

Prodigy 80 points

Hi Karan,

Please share the LVC1G374 Model.

We want to simulate it with exact component not from alternate Part.

Many Thanks

Rajat

0 Dilip Namdeo Mohol over 4 years ago in reply to Rajat Singh

TI__Intellectual 1420 points

Hi Karan,

It's very Urgent. Appreciate if you can Can you expedite model development work.

0 Dylan Hubbard over 4 years ago in reply to Dilip Namdeo Mohol

TI__Mastermind 42600 points

Hi Dilip,

Is out of office on business travel, so its most likely going to take the full two weeks. When he gets back in the office Monday, I will relay this info to him.

0 Karan Kotadia over 4 years ago in reply to Dylan Hubbard

TI__Genius 16725 points

Hi,

I have created this SN74LVC1G374 model for you. Please let me know if this works as you need.

SN74LVC1G374_SCHEMATIC.CIR

SN74LVC1G374_Behavioral_Model.TSC

Thanks!

-Karan

Logic

Logic forum

SN74LVC1G374: Issue with HSPICE Symbol