This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC125A-Q1: SN74LVC125A-Q1 in series, is it possible?

Part Number: SN74LVC125A-Q1
Other Parts Discussed in Thread: MSP430F5438A

Dear all,

The project is composed by two stack of electronic boards the share an SPI Port. The 2 stacks are connected by a 40cm long cable. Below you can find an image to clarify the ideas.

My idea is to use SN74LVC125A-Q1 to improve the output strength of the MSP430F5438A to drive the cable. Also I'd like to use 2 SN74LVC125A-Q1, one for each stack. 

I read the voltage levels and for me they are ok, but i would like confirmation from you if is this configuration acceptable. 

Thanks for your work

Best regards

Damiano