Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVTH125: Parallel buffers to drive 50-ohm load

Part Number: SN74LVTH125

The part is SN74LVTH125PW

The buffer IC is driven by 3.3V, the Iout is 32mA. Can I put two of these buffers in parallel to increase output current for driving 50-ohm load (scope input)?

32mA * 2 buffers = 64mA

64mA * 50 = 3.2V

Any harm in this?